Introduction
This guide provides step-by-step instructions for installing yellow DRL Angel Eyes on BMW 8 Series/M8 (2018-2024) models. At Macote, we specialize in BMW modifications, offering high-quality DRL solutions. Our range includes CSL-Yellow, Red, Blue, and other color variants.
For an easier installation, we also provide a variant with pre-mounted DRL boards on the heatsink (DRL module), eliminating the need for complex disassembly.
Note: Always consult your vehicle’s manual or seek professional assistance if unsure about any step. Our LED DRL boards are designed only for original headlights and are not compatible with aftermarket headlights.
Replacing Engine Bay Side DRL Boards
Required Tools
✔️ Gloves
✔️ Torx screwdriver set
✔️ Drill (if opting for DRL boards only)
✔️ Surface cleaner
Preparation
- Turn off the ignition and disconnect the battery to prevent any risk of electrocution.
- Lift the vehicle using a car lift or jack for better access to the wheel arch liners.
- If you prefer a hassle-free installation, choose pre-mounted DRL boards on the heatsink, avoiding the need to drill the original boards.
Installation Steps
1️⃣ Remove the engine cover fixings
➡️ Detach the push fixings securing the front engine cover.
2️⃣ Remove the DRL module
➡️ Unscrew all T20 screws and carefully disconnect the DRL module.
3️⃣ Remove the old daytime running lights
➡️ Drill out the original rivets to remove the old LED DRL board from the heatsink.
4️⃣ Clean the heatsink from OEM thermal paste
➡️ Use a surface cleaner to ensure proper adhesion of the new DRL board.
5️⃣ Install the new DRL board
➡️ Secure the new LED DRL board (Yellow Angel Eyes) with the provided screws.
6️⃣ Reattach the DRL module
➡️ Reinstall the yellow DRL module and ensure all connections are properly secured.
7️⃣ Complete the inner DRL board installation
➡️ Reattach all covers and parts removed during the process.
Replacing DRL Boards Behind the Wheel Arch Liners
Additional Required Tools
✔️ 8mm/10mm socket wrench
Preparation
- Remove the front wheels to gain better access to the wheel arch liners.
- Detach the wheel arch liners by removing the 8mm/10mm screws.
Installation Steps
1️⃣ Remove the front wheels and wheel arch liners
➡️ Take off the front wheels and carefully remove the wheel arch liners.
2️⃣ Follow the same steps as the inner DRL board replacement
➡️ Repeat the previous steps to replace the outer DRL boards.
➡️ Ensure the outer DRL module is correctly aligned and securely fastened.
Conclusion
By following these instructions, you can easily and safely replace the DRL boards on your BMW 8 Series/M8 (2018-2024).
For a simplified installation, consider purchasing pre-mounted DRL boards on the heatsink, available on Macote.
🚗 Need assistance? Consult a professional or refer to your vehicle’s manual.
Why Choose Macote for Your BMW Modifications?
🔹 High-quality BMW-specific DRL solutions
🔹 Compatible with BMW 8 Series/M8 original headlights
🔹 Exclusive colors like CSL-Yellow, Red, Blue, and more
🔹 Available for various BMW models
💡 Shop our BMW DRL kits now on Macote!